| Processor |
| Number of processors |
One to six |
| Architecture |
Superscalar SPARC Version 9,
UltraSPARC |
| CPU MHz |
250 or 336 |
| Cache per processor |
Primary: 16-KB instruction,
and 16-KB data on chip
Secondary: 1-MB or 4 MB external cache |
| CPU interface |
One to six, 128-bit Ultra Port
Architecture (UPA) slots |
| System Boards |
| Number of boards |
Maximum of four boards per
system; minimum configuration requires one CPU/Memory board
and one I/O board |
| CPU/Memory board |
Holds up to two processors
and 16 memory SIMM slots |
| SBus I/O board |
Offers two SBus channels, three
SBus slots, SunFastEthernet, fast/wide SCSI, two fibre channel
sockets |
| SBus Graphics I/O board |
Offers one SBus channel, two
SBus slots, one UPA slot for Creator and Creator3D graphics,
SunFastEthernet, fast/wide SCSI, two FC-AL sockets |
| PCI I/O board |
Offers four PCI channels, two
PCI slots, SunFastEthernet, fast/wide SCSI |
| Main Memory |
256-MB to 6-GB memory capacity per system
256-MB and 1-GB memory expansion options (each a group of 8
SIMMs)
Up to two memory expansion options per board |
| Standard
Interfaces |
| Serial |
Two RS-232/423
ports on clock board |
| SBus |
64-bit data bus width, 25 MHz |
| PCI |
64-bit data bus width, 66 MHz |
| Keyboard and mouse port |
One per system |
| Ethernet |
10/100 MB/sec twisted pair
standard (10-BaseT and 100-BaseT) or MII transceiver per I/O
board |
| SCSI |
20-MB/sec fast/wide SCSI-2
(synchronous) per I/O board |
| FC-AL |
Two sockets (100 MB/sec) per
SBus I/O board |
| Internal
Mass Storage |
| Internal disk |
Maximum ten 3.5-in. hot-swap
SCSI-2 disk drives, 1.0-in. or 1.6-in. form factor (2.1-GB,
4.2-GB, or 9.1-GB formatted) |
| Tape |
Optional 20-GB 8mm tape drive,
12- to 24-GB DDS3 tape drive, 14-GB 8mm tape drive, or 2.5-GB
.25-in. tape drive |
| CD-ROM |
SunCDTM
12 drive standard |
| External
Mass Storage |
| Disk |
SPARCstorageTM
Array Model 100 Series (maximum thirty 2.1-GB or 4.2-GB fast/wide
SCSI-2 disks), SPARCstorage MultiPack (up to 54.6 GB using 2.1-GB,
4.2-GB, or 9.1-GB drives) |
| Tape |
4- to 8-GB 4mm DDS2 tape, 72- to 144-GB
4mm DDS3 autoloader, 20- to 40-GB 8mm tape, 2.5-GB .25-in. tape,
140-GB SPARCstorage Library, 400-GB SPARCstorage Library, 20-
to 40-GB SPARCstorage DLTTM 4000,
35- to 70-GB SPARCstorage DLT 7000, SPARCstorage DLT 4700 autoloader |
| Console
Options |
| Monitor |
17- or 20-in color monitor |
| Frame buffer |
TurboGXTM,
TurboGXplus, Creator or Creator3D frame buffer |
| SBus Options |
| SunFastEthernet adapter, SunATMTM
adapter, SBus quad Ethernet controller, differential fast/wide
intelligent SCSI-2 SBus (DWIS/S), single-ended fast/wide intelligent
SCSI-2 SBus (SWIS/S) host adaptor, HSI, Token Ring interface,
FDDI, fast SCSI-2/buffered Ethernet, fast differential SCSI-2/buffered
Ethernet, fibre channel |
| PCI Options |
| High-speed serial interface, FDDI, SunFastEthernet,
fast/wide SCSI |
| Power Supplies |
Up to three 300-watt system power supplies.
One power supply required per two sytems boards.
Up to two 184-watt peripheral power supplies.
Fully redundant power and cooling available on this system.
|
| Environment |
| AC power |
100-240 VAC, 47-63 Hz, 10 A |
| Operating |
5°C to 35°C (41°F to 95°F)
20% to 80% relative humidity, noncondensing |
| Nonoperating |
-20°C to 60°C (-4°F to
140°F) 5% to 93% relative humidity, noncondensing |
| Regulations |
| Safety |
UL 1950, CSA 950, TUV EN60950, CB Scheme
(Nordic Deviation) |
| RFI/EMI |
FCC Class A, DOC Class A, EN55022 Class
A, VCCI Class 1 |
| Immunity |
EN50082-1 |
| Harmonics |
EN61000-3-2 |
| Dimensions
and Weights |
| Height |
65 cm (25.5 in.) |
| Width |
43 cm (17.0 in.) |
| Depth |
60 cm (23.5 in.) |
| Weight, main cabinet |
72.5 kg (160 lb.) approx. |
| Power cord |
1.83 m (6 ft.) |
| Upgrades |
| Chassis-level upgrades are available for
SPARCserver 10, SPARCserver 20, SPARCserver 470, SPARCserver
490, SPARCserver 330, SPARCserver 370, SPARCserver 390, Sun-3TM
deskside systems. |
