· End-User Login
· Buy IT
· Sell IT
· About ITParade.com
· Home

Advertisements
 
 
 
 
Warwick Data Systems: We buy, sell, rent, and repair Cisco Systems networking equipment
 
 
<- Back

Catalyst 2948G-L3 10/100 and
Gigabit Ethernet Layer 3 Switch

The Catalyst 2948G-L3 switch is a fixed-configuration Layer 3 (L3) Ethernet switch featuring wire-speed switching for Internet Protocol (IP), Internetwork Packet Exchange (IPX), and IP multicast.

The Catalyst 2948G-L3 switch provides non-blocking routing and switching for IP, IPX, and IP multicast while also offering wire-speed Layer 2 switching for non-routable protocols such as NetBIOS and DECnet local-area transport (LAT). This capability allows network managers to augment their multi- protocol backbones with the Catalyst 2948G-L3 without having to build parallel networks, as is often required with IP-only switches.

Technical Specifications for the Catalyst 2948G-L3

Description

Specification

Performance

22 Gbps switching fabric

Over 10 million PPS wire-speed forwarding rate for 64-byte packets

MIPs RISC CPU-R5000, 16 MB Flash, 64 MB DRAM

Route Entries: 12,000 minimum; 24,000 maximum

12 MB memory architecture shared by all ports

Packet forwarding rate for 64-byte packets:

14,880 pps for 10-Mbps ports

148,800 pps for 100BaseT ports

1,488,000 pps for 1000BaseX ports

Management

SNMP Management Information Base (MIB) II

CiscoWorks 2000

Standards

IEEE 802.3x full duplex on 10BaseT, 100BaseTX, and 1000BaseX ports

IEEE 802.1D Spanning-Tree Protocol

IEEE 802.1Q VLAN

IEEE 802.3z 1000BaseX specification

1000BaseX (GBIC)

1000BaseSX

1000BaseLX/LH

1000BaseZX

IEEE 802.3u 100BaseTX specification

IEEE 802.3 10BaseT specification

Software

Cisco IOS 12.0

Y2K

Y2K compliant

Connectors and Cabling

10BaseT ports: RJ-45 connectors; two-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling

100BaseTX ports: RJ-45 connectors; two-pair Category 5 UTP cabling

1000BaseX GBIC ports: SC fiber connectors, single mode or multimode fiber

Console and auxiliary port: RJ-45 connectors, RS-232 serial cabling

Indicators

Per-port status LEDs

link up - illuminated

10 Mbps operation - Yellow

100 Mbps operation - Green

link down - not illuminated

System status LED - Green



Part Numbers for the Catalyst 2948G-L3
Part Description Part Number
Catalyst 2948G-L3 switch, fixed 48 10/100 FE, 2 1000BaseX (GBIC). Includes support for IP, IP multicast, and bridging Note: GBIC modules need to be ordered separately WS-C2948G-L3
IP Switching License, Includes OSPF, IGRP, EIGRP FR2948GL3-IP
IPX switching license FR2948GL3-IPX
1000BaseSX GBIC module WS-G5484=
1000BaseLX/LH GBIC module WS-G5486=
1000BaseZX GBIC module WS-G5487=
Gigabit Ethernet multimode conditioning cable CAB-GELX-625
600W redundant AC power system with DC power cables PWR600-RPS-YCAB=
Catalyst 2948G-L3 rack-mount kit (spare) STKRACKMOUNT1.5RU=
SMARTnet maintenance 8 x 5 x nbd CON-SNT-WS-C2948
SMARTnet maintenance 8 x 5 x 4 CON-SNTE-WS-C2948
SMARTnet maintenance 24 x 7 x 4 CON-SNTP-WS-C2948
SMARTnet maintenance Onsite 8 x 5 x nbd CON-OS-WS-C2948
SMARTnet maintenance Onsite 8 x 5 x 4 CON-OSE-WS-C2948
SMARTnet maintenance Onsite 24 x 7 x 4 CON-OSP-WS-C2948
Mini-RMON Agent License
Catalyst 2948G-L3 RMON Agent License WS-C2948G-EMS-LIC
©2005 ITParade.com, Inc. Use of this Web site constitutes acceptance of our Privacy Policy.