· End-User Login
· Buy IT
· Sell IT
· About ITParade.com
· Home
Advertisements
 
 
 
 
Warwick Data Systems: We buy, sell, rent, and repair Cisco Systems networking equipment
 
 
<- Back

Cisco 7000 Series

The standard system requires one Route Processor and one Switch Processor (or Silicon Switch Processor). An upgraded RSP7000 system requires one 7000 series Route Switch Processor (RSP7000) and one 7000 series Chassis Interface (RSP7000CI). Processors can be ordered in two ways: as spares or as upgrades.

Cisco offers the RSP7000, which is available as an upgrade kit for existing Cisco 7000 and Cisco 7010 systems. The RSP7000 significantly increases the performance for most features and protocols and provides a migration path that enables Cisco 7000 and Cisco 7010 systems to take advantage of advanced VIP features.

Cisco IOS Releases 10.3(9), 11.0(6), 11.1(1), and later support the RSP7000 upgrade.

The RSP7000 upgrade consists of the following:

  • Upgrade instructions (included in upgrade kit)

  • RSP7000 (included in upgrade kit)

  • RSP7000CI (included in upgrade kit)

  • PCMCIA Flash memory card (8 MB is the default if not specified)

A Cisco 7000 series router with an RSP7000 upgrade requires a Cisco IOS feature set and feature set license supporting the RSP.

The RSP7000 has the same interface processor compatibility requirements as the Cisco 7500 series router. In Cisco 7000 routers, the RSP7000 must be installed in the SP (or SSP) slot, and the RSP7000CI must be installed in the RP slot.The RSP7000 cannot be used in a Cisco 7500 series router, and an RSP1, RSP2, or RSP4 cannot be used in a Cisco 7000 series router.

DRAM Guidelines

Use the following guidelines when ordering DRAM for the Cisco 7000 series:

  • For the RSP7000, DRAM is contained in four SIMM slots (two banks of two SIMMs each).

  • For the RSP7000, bank 0 must be greater than or equal to bank 1.

  • Do not mix DRAM sizes within a bank.

DRAM Size Recommendations—RSP7000

DRAM Size

Network Size

Cisco 7000

Cisco 7010

RSP7000

Small

32 MB

32 MB

32 MB

Medium

32 MB

32 MB

32 MB

Large

64 MB

64 MB

64 MB

32 MB of DRAM is shipped with the RSP7000 as the default. Although some small network configurations might be able to run with 24 MB of DRAM, the standard 32 MB is recommended.

Small networks efficiently support fewer than 2000 IP routes.

Medium networks efficiently support 2000 to 10,000 IP routes.

Large networks efficiently support more than 10,000 IP routes.
Minimum DRAM Requirements RSP7000
Running Cisco IOS Release 11.2 and 11.1

Features

RSP Only

RSP and VIP2

IP only

16 MB

24 MB

IP, VIP/VIP2

16 MB

24 MB

Enterprise

16 MB

24 MB

Enterprise/APPN

24 MB

24 MB

Enterprise, VIP/VIP2

24 MB

24 MB

Enterprise, APPN, VIP/VIP2

24 MB

24 MB

Desktop/IBM

16 MB

24 MB

Desktop, IBM, VIP/VIP2

16 MB

24 MB

Desktop/IBM/APPN

16 MB

24 MB

Desktop, IBM, APPN, VIP/VIP2

16 MB

24 MB

IP/IPX/IBM

16 MB

24 MB

IP/IPX/IBM/APPN

16 MB

24 MB

SIMM Default Configurations—RSP7000

Available DRAM memory

SIMM Size

Number of SIMMs

16 MB

8 MB

2

24 MB

2 8-MB and 2 4-MB

4

32 MB

16 MB

2

64 MB

32 MB

2

128 MB

32 MB

4

Part Numbers for the Cisco 7000 Series

Part Description Part Number
Cisco 7000 Series Processor Boards
Route Processor with 64-MB RAM RP-64MB=
Upgrade from RP to RP-64MB RP-64MB-U=
Silicon Switch Processor with 2 MB of packet memory SSP-2MB=
Upgrade from SP to SSP1 UPG-SSP=
7000 series Route Switch Processor RSP7000
7000 series Chassis Interface3 RSP7000CI
Upgrade from SP to SSP-2MB1 UPG-SSP-2MB=
Upgrade kit for both RP and SP4 UPG-RSP7000=
Cisco 7000 Series RP Flash Memory Cards
8-MB Flash memory card with sleeve MEM-RP-FLC8M=
16-MB Flash memory card with sleeve MEM-RP-FLC16M=
Cisco 7000 Series RSP7000 Flash Memory Cards
8-MB Flash memory card MEM-RSP-FLC8M=
16-MB Flash memory card (default, shipped with RSP7000) MEM-RSP-FLC16M
20-MB Flash memory card (installed in system) MEM-RSP-FLC20M
Cisco 7000 Series RSP7000 DRAMs
8-MB DRAM (2 4-MB SIMMs) (spare) MEM-RSP-8M=
16-MB DRAM (2 8-MB SIMMs) (spare) MEM-RSP-16M=
32-MB DRAM (2 16-MB SIMMs) MEM-RSP-32M
64-MB DRAM (2 32-MB SIMMs) MEM-RSP-64M
128-MB DRAM (4 32-MB SIMMs) MEM-RSP-128M
Spare AC-input Power Supplies
Cisco 7000
Australia PWR/7-ACA=
Europe PWR/7-ACE=
Italy PWR/7-ACI=
United Kingdom PWR/7-ACU=
USA PWR/7-AC=
Cisco 7010
Australia PWR/5-ACA=
Europe PWR/5-ACE=
Italy PWR/5-ACI=
United Kingdom PWR/5-ACU=
USA PWR/5-AC=
Cisco 7000 Accessories
Spare packaging material PKG-7000=
Cisco 7010 Accessories
Spare packaging material PKG-7010=

Cisco IOS Software Product Numbers
for the Cisco 7000 Series

Description

Cisco IOS Release 11.2

Cisco IOS Release 11.1

Cisco IOS Release 11.0

RP systems

Enterprise

SW7A-
11.2.x=

SR7A-
11.2.x=

SWR-G7A-
11.1.x=

SWR-G7A-
11.0.x=

Enterprise, VIP

SW7AV-
11.2.x=

SR7AV-
11.2.x=

SWR-G7AV-
11.1.x=

-

Enterprise, APPN

SW7AN-
11.2.x=

SR7AN-
11.2.x=

SWR-G7AN-
11.1.x=

SWR-G7AN-
11.0.x=

Enterprise, APPN, VIP

SW7ANV-
11.2.x=

SR7ANV-
11.2.x=

SWR- G7ANV-
11.1.x=

-

Desktop, IBM

SW7BS-
11.2.1=

SR7BS-
11.2.1=

SSWR-G7BS-
11.1.x=

SWR-G7BS-
11.0.x=

Desktop, IBM, VIP

SW7BSV-
11.2.1=

SR7BSV-
11.2.1=

SWR-G7BSV-
11.1.x=

-

Desktop, IBM, APPN

SW7BSN-
11.2.1=

SR7BSN-
11.2.1=

-

-

Desktop, IBM, APPN, VIP

SW7BSNV-
11.2.1=

SR7BSNV-
11.2.1=

-

-

IP/IPX, IBM

-

SWR-G7DS-
11.1.x=

SWR-G7DS-
11.0.x=

IP/IPX, IBM, VIP

-

SWR-G7DSV-
11.1.x=

-

IP/IPX, IBM, APPN

-

SWR-G7DSN-
11.1.x=

SWR-G7DSN-
11.0.x=

IP/IPX, IBM, APPN, VIP

-

SWR-G7DSNV-
11.1.x=

-

IP only

SW7C-
11.2.x=

SR7C-11.2.x=

SWR-G7C-
11.1.x=

SWR-G7C-
11.0.x=

IP, VIP

SW7CV-
11.2.x=

SR7CV-
11.2.x=

SWR-G7CV-
11.1.x=

-

RSP systems

Enterprise

SF75A-
11.2.x

SW75A-
11.2.x=

SF-G75A-
11.1.x

SW-G75A-
11.1.x=

SF-G75A-
11.0.x

SW-G75A-
11.0.x=

Enterprise and Encryption 40

SF75AK-
11.2.x

SW75AK-
11.2.1=

-

-

Enterprise and Encryption 56

SF75AT-
11.2.x

SW75AT-
11.2.1=

-

-

Enterprise, VIP/VIP2

SF75A-
11.2.x

SW75A-
11.2.x=

SF-G75AV-
11.1.x

-

Enterprise, APPN

SF75AN-
11.2.x

SW75AN-
11.2.x=

SF-G75AN-
11.1.x

SW-G75AN-
11.1.x=

SF-G75AN-
11.0.x

SW-G75AN-
11.0.x=

Enterprise, APPN, and Encryption 40

SF75ANK-
11.2.

SW75ANK-
11.2.1=

-

-

Enterprise, APPN, and Encryption 56

SF75ANT-
11.2.x

SW75ANT-
11.2.1=

-

-

Enterprise, APPN, VIP/VIP2

SF75AN-
11.2.x

SW75AN-
11.2.x=

SF-G75ANV-
11.1.x

-

Desktop, IBM

SF75BS-
11.2.x

SW75BS-
11.2.x=

SF-G75BS-
11.1.x

SW-G75BS-
11.1.x=

SF-G75BS-
11.0.x

SW-G75BS-
11.0.x=

Desktop, IBM, and Encryption 40

SF75BSK-
11.2.x

SW75BSK-
11.2.1=

-

-

Desktop, IBM, and Encryption 56

SF75BST-
11.2.x

SW75BST-
11.2.1=

-

-

Desktop, IBM, VIP/VIP2

SF75BS-
11.2.x

SW75BS-
11.2.x=

SF-G75BSV-
11.1.x

-

Desktop, IBM, APPN, VIP/VIP2

SF75BSN-
11.2.x

SW75BSN-
11.2.1=

-

-

IP/IPX, IBM

-

SF-G75DS-
11.1.x

SW-G75DS-
11.1.x=

SF-G75DS-
11.0.x

SW-G75DS-
11.0.x=

IP/IPX, IBM, VIP/VIP2

-

SF-G75DSV-
11.1.x

-

IP/IPX, IBM, APPN

-

SF-G75DSN-
11.1.x

SW-G75DSN-
11.1.x=

SF-G75DSN-
11.0.x

SW-G75DSN-
11.0.x=

IP/IPX, IBM, APPN, VIP/VIP2

-

SF-G75DSNV-
11.1.x

-

IP only

SF75C-
11.2.x

SW75C-
11.2.x=

SF-G75C-
11.1.x

SW-G75C-
11.1.x=

SF-G75C-
11.0.x

SW-G75C-
11.0.x=

IP and Encryption 40

SF75CK-
11.2.x

SW75CK-
11.2.1=

-

-

IP and Encryption 56

SF75CT-
11.2.x

SW75CT-
11.2.1=

-

-

IP, VIP/VIP2

SF75C-
11.2.x

SW75C-
11.2.1=

SF-G75CV-
11.1.x

-

Cisco IOS Software Feature Licenses
for the Cisco 7000 Series

Category

Features

Product Number

RP

WAN packet protocols

X.25, X.25 switching, Switched 56, Frame Relay, Frame Relay switching, SMDS, ATM DXI, SMDS over ATM

In Cisco IOS Release 11.2 only: all of the above plus Frame Relay SVC support (DTE) and Frame Relay traffic shaping

FR-WPP7=

Interdomain routing

BGP, EGP for Internet scale routing

In Cisco IOS Release 11.2 only: all of the above plus BGP4

FR-IR7=

VIP/VIP2 support

Included automatically with VIP order

-

CIP2 support

TCP/IP offload feature for CIP (or CIP2)

R-CIP-TCPOFF=

SNA support feature for CIP2 SNA

FR-CIP-CSNA=

RSP7000

WAN packet protocols

X.25, X.25 switching, Frame Relay, SMDS, Frame Relay switching, Switched 56, ATM DXI, SMDS over ATM

In Cisco IOS Release 11.2 only: all of the above plus Frame Relay SVC support (DTE) and Frame Relay traffic shaping

FR-WPP75, FR-WPP75=

Interdomain routing

BGP, EGP for Internet scale routing

In Cisco IOS Release 11.2 only: all of the above plus BGP4

FR-IR75, FR-IR75=

Network Address Translation (NAT)

NAT support

FR-NAT75, FR-NAT75=

Netflow switching

Netflow switching

FR-NF75, FR-NF75=

VIP/VIP2 support

Included automatically with VIP order

-

CIP2 support

TCP/IP offload feature for CIP2

FR-CIP-TCPOFF, FR-CIP-TCPOFF=

SNA support feature for CIP2 SNA

FR-CIP-CSNA, FR-CIP-CSNA=

 

Cisco IOS Software Upgrades—Cisco 7000 Series

Feature Set Upgrade

Product Number

RP

IP to IP/IPX and IBM Base Upgrade

FR7-CDS=

IP to Desktop and IBM Base Upgrade

FR7-CBS=

IP to Enterprise Upgrade

FR7-CA=

IP/IPX and IBM to Desktop and IBM Upgrade

FR7-DSBS=

IP/IPX and IBM to Enterprise Upgrade

FR7-DSA=

Desktop and IBM to Enterprise Upgrade

FR7-BSA=

APPN Upgrade

SW-G7NU-11.0.4=

APPN Upgrade

SW-G7NU-11.1.1=

IP/IPX and IBM and APPN to Enterprise and APPN Upgrade

SW-G7DNNU-11.0.4=

IP/IPX and IBM and APPN to Enterprise and APPN Upgrade

SW-G7DNNU-11.1.1=

RSP7000

IP to IP/IPX and IBM Base Upgrade

FR75-CDS=

IP to Desktop and IBM Base Upgrade

FR75-CBS=

IP to Enterprise Upgrade

FR75-CA=

IP/IPX and IBM to Desktop and IBM Upgrade

FR75-DSBS=

IP/IPX and IBM to Enterprise Upgrade

FR75-DSA=

Desktop and IBM to Enterprise Upgrade

FR75-BSA=

Cisco IOS Encryption 40 Upgrade

FR75-40=

Cisco IOS Encryption 56 Upgrade

FR75-56=

APPN Upgrade

SW-G75NU-11.0.x=

APPN Upgrade

SW-G75NU-11.1.x=

IP/IPX and IBM and APPN to Enterprise and APPN Upgrade

SW-G75DNNU-11.0.x=

IP/IPX and IBM and APPN to Enterprise and APPN Upgrade

SW-G75DNNU-11.1.x=
©2005 ITParade.com, Inc. Use of this Web site constitutes acceptance of our Privacy Policy.