Cisco 700 series Internet access devices are available in several configurations. For a simple connection of your PC to an ISDN service, the Cisco 761M provides a single WAN port and a single Ethernet port. The Cisco 775M provides a single WAN port, four Ethernet ports (integrated hub), and two analog telephone interfaces that allow standard telephones, fax machines, and modems to share the ISDN line. These analog telephone interfaces eliminate the need for multiple telephone lines and expensive ISDN telephones. They also support supplementary telephone services such as call waiting, call hold, call transfer, call-forwarding (Sweden and Finland), and three-way conferencing.

Cisco 775M Rear View

Technical Specifications for Cisco 700 Series

Description		Cisco 761	Cisco 775	Cisco 776
ISDN Interface		S/T	S/T	S/T and U
Market		Worldwide	Worldwide	North America
Number of Users		Up to 30	Up to 30	Up to 30
Processor	Model	386	386	386
	Speed	25 MHz	25 MHz	25 MHz
Memory	Standard DRAM	1.5 MB	1.5 MB	1.5 MB
	NVRAM	16 KB	16 KB	16 KB
	Flash	1.0 MB	1.0 MB	1.0 MB
Telephone	Analog Ports	n/a	RJ-11	n/a
	REN	n/a	5	n/a
	Caller ID	n/a	North America Only	n/a
Ethernet		10BaseT	4-port 10BaseT	10BaseT
Console	Connection	DB-9F	DB-9F	DB-9F
Power Information	Call connect/ disconnect Switch	No	Yes	Yes
	Ring power	No	4.7 REN	4.7 REN
	Power supply	AC external switching	AC external switching	AC external switching

Each Cisco 700 series model comes with software feature set that supports:

• IP/IPX routing for up to 1500 PCs (recommended for up to 5 users)

• STAC compression for faster transmission

• X.25 over ISDN (D) for point of sale (POS) applications

• Bandwidth on demand (BOD) B channel aggregation

• Always on/dynamic ISDN (AO/DI)

• Built-in Dynamic Host Control Protocol (DHCP) server

• Configuration through Trivial File Transfer Protocol (TFTP), remote downloads, and autoconfiguration

• Works with 3rd party firewall clients

• PAT (Port Address Translation) and caller call back for security

• Call bumping with sometimes/always/never priority to date

• Select ISDN supplementary services

To use a CAPI-compliant application with the Cisco 700 series Internet access device, all clients must have RVS-COM Lite software installed and properly configured on their PCs.

The CAPI feature is bundled with the Cisco 700 series and is available as a software upgrade.