The
HP 10BaseT Hub-16M supports the following standard features:
Sixteen
10BaseT ports and one AUI port for workgroup connectivity to coaxial
or fiber Ethernet cable
SNMP,
Telnet, and terminal-based out-of-band management console support
for comprehensive management and simplified troubleshooting
Can
be managed by CiscoWorks Windows and other SNMP-compatible management
systems on a per-port and per-hub basis
Hub-level
and port-level security features including intruder prevention, auto
port disabling, network management alarm, eavesdrop prevention, and
password protection to prevent unauthorized network access
Multifunction
status LED per port for link integrity/receive activity and port enabled/disabled
indication; and a collision, activity, security, and fault indicator
for the hub provide a comprehensive and convenient visual management
system
Automatically
partitions and reconnects ports experiencing excessive collisions
to prevent network-wide disruption
Supports
Cisco Discovery Protocol to enable a CiscoWorks Windows network management
station to automatically discover the device in a network topology
MDI/MDI-X
switch for inter-hub connectivity without special crossover cables
Supports
an optional external Cisco Redundant Power System for improved fault
tolerance and enhanced network uptime
Cisco
StackMaker support for simplified device configuration, monitoring,
and management of an entire system by CiscoWorks Windows
Technical
Specifications
Description
Specification
Configuration
guidelines
Maximum
UTP cable distance between one HP 10BaseT Hub-16M hub and one end
station: 328 ft (100m)
Maximum
UTP cable distance between any two HP 10Base-T Hub-16M hubs: 328
ft (100m)
Maximum
number of HP 10BaseT Hub-16M hops in a data path over UTP cabling:
4
Maximum
number of HP 10BaseT Hub-16M hubs in a common thin Ethernet segment:
30
MDI/MDI-X
switch on front panel to configure port 16 for use with straight-through
cable
Cabling
requirements
Standard
RJ-45 connectors for 16 ports; AUI connector for port 17
Two-pair
Category 3, 4, or 5 UTP wiring (RJ-45)
Management
SNMP
management information base (MIB) II, SNMP MIB extensions, repeater
MIB, Cisco IOS software, and HP management extensions
CiscoWorks
Windows and other SNMP management systems
Telnet
and terminal-based out-of-band management console
IP
assignment via bootstrap protocol (BOOTP)
Indicators
Per-port
LEDs for link integrity, receive activity, and enabled/ disabled
status
Per-hub
LEDs indicate power, redundant power system (RPS), activity, collision,
security, and fault status
Redundancy
Supports
connection to the optional Cisco Redundant Power System
Compatible
with IEEE 802.3 standard for interoperability with other 10BaseT
products
