Facilitates
the transmission of voice and data simultaneously from a single platform
(circuit-switched and packet-based)
High-density,
scalable platform:
A
single Cisco 6732 can support up to 496 POTS circuits, 124 DS1s
or 62 T1s.
Four
Cisco 6732s in a 7 in. (17.8 cm) rack can support up to 1984 POTS
circuits, 496 DS1s or 248 T1s.
ATM
transport
When
used with a Cisco 6705, the Cisco 6732 delivers a seamless end-to-end
(CO, RT, MDU, CPE) integrated access solution
Narrowband
line interface module options — RPOTS/16, FXS/16, RUVG/8, ISDN-BRI/8
Wideband
line interface module options — DS1, T1
Broadband
line interface module options — DS3, STS1, OC3c
xDSL
line interface module — MSDSL-2W (multi-rate symmetric digital
subscriber line, 2 wire) and plan to offer a variety of additional
xDSL options
Technical
Specifications for Cisco 6732
Description
Specification
Cisco
6732 Service Modules
Power
Supply
BPS-HP
— Bank power supply/high power (provides power to the main control
card and overcurrent protection to line interface module input power)
Main
Control Modules
MCC-STR3
— Main Control Card with Stratum 3 Clock, CPU (performs centralized
processing, synchronization, and some switching functions)
MCC-STR4
— Main Control Card with Stratum 4 Clock, CPU (performs centralized
processing, synchronization and some switching functions-used with
systems providing analog services only)
Alarm
Maintenance and Management
AMM
— Alarm Maintenance and Management Card
MTAC-TEI
— Cisco 6732 metallic test access card, test equipment interface
Bank
Ring Generator
BRG
— Provides the appropriate ring voltage for RPOTS/16 and RUVG/8
modules
Cisco
6700 Line Interface Modules
Narrowband
Line Interface Modules
FXS/16
— Foreign exchange service/built-in ring generation (16 ports)-64
kbps
STSX1
— Synchronous transport signal level 1, electrical interface, channelized
DS1s/DS0s (two 18-inch coax cables included with module)-51.84 Mbps
xDSL
Line Interface Module
MSDSL-2W
— Multi-rate symmetric digital subscriber line-2-wire (4 ports)-64
kbps to 2.3 Mbps
Element
Management System Access
RJ-45
Ethernet (SNMPv2)
1.
A single Cisco 6732 can support 4 fully utilized DSX3, STSX1, or OC3C-UNI
broadband line interface modules (slots 17 - 20). The Cisco 6732 can also
support 27 additional sub-utilized broadband line interface modules in
slots 2 - 16 and 21 - 32. Sub-utilized DSX3 and STSX1 modules provide
10 DS1s per circuit. Sub-utilized OC3C-UNI modules support 27 MB of traffic.
Part Numbers for the Cisco 6732
Part
Description
Part
Number
Cisco
6700 Series Products
Cisco
6732 Chassis
6732
Card Cage and Backplane
CISCO6732=
6732
Main Chassis Hardware, Protected
CISCO6732
Cisco
6732 Hardware Accessories
Fan
Assembly, Filter
6700-ACC-FAN=
Air
Ramp Baffle
6700-ACC-AIR-R=
Cisco
6732 Common Cards
Bank
Power Supply Card, High Power for 6732
6732-PWR-HP=
Main
Control Card, Stratum 4 Clock CPU, Ethernet
6732-SM-MCC4=
Main
Control Card, Stratum 3 Clock CPU
6732-SM-MCC3=
Metalic
Test Access Card
6700-SM-MTAC-TEI=
Alarm
Maintenance and Management Card
6700-SM-AMM=
Bank
Ring Generator Card
6700-SM-BRG=
Cisco
6700 Series Wideband Transport Cards
DS1
Cross Connect Interface, DS1, ISDN-PRI, FR, IP
6700-LIM-DS1=
Universal
Long-Haul DS1, Short-Haul DSX1, with V.35